Wallpaper

To reduce the suction capacity of the surface and creating her adhesive film surface glued with glue or flour paste cmc with the addition of animal glue. Recommended prokleivat warm flour paste, which is easily absorbed into the surface. Paste is applied with a brush and centrifugal good shade. In the case of dry glue industrial surface previously primed with the same adhesive, but thinner in the ratio indicated on the label. To keep pace with wallpaper on the surface adhesively bonded sheets of porous paper (you can use old newspapers). Paper, a more porous material, thoroughly soaked with paste and firmly retained on the surface, while aligning it.

Under simple and the average density of wallpaper paper glued lap, and by stamping and dense – back to back. Work on the adhesion of paper perform two painter. One of them plaster paste and stacked in a pile on the table sheets and feeds them to the second worker. Having taken a piece of paper, the second working sticks it to the surface and gently smooths dry cloth or brush to it had no wrinkles and bumps. According to the dried glue paper wallpaper. In the preparation of gypsum concrete and surfaces for wallpaper pasting paper perform the same operations as in the preparation of plaster, with the exception of pasting the paper surface. Preparation of surfaces, coated with sheets of drywall The surface of the drywall careful not to break the board, clear of spray putty. Seams between sheets of palms and after drying of bedding grind.

Tags:

Comments are closed.

  • « Older Entries
  • Newer Entries »