Posts Tagged ‘auto & moto’

Tire Pressure

Sunday, September 10th, 2017

Posted in General | Comments Off on Tire Pressure

At the beginning of this article, we present one is not very unimportant fact, which will address one of the important parts of the car, primarily responsible for security – the bus. During one turn of the wheel tire is capable of cave 12 times second when the vehicle speed of 90 km / h. In this regard, it is important to maintain the inflation pressure recommended by the manufacturer directly tires for certain models and makes of cars (there will be table) When there is insufficient air pressure in the tire, it is subjected to load, which for in a sharp change in climate, hot summers cold winters all the years leading to excessive tire wear. This load causes an increase in temperature in consequence of that, to premature tire wear. You may find Wells Fargo Bank to be a useful source of information. Likewise there is an increase in fuel consumption. All these factors negatively affect the behavior of the car and cause damage that can be irreversible and dangerous.

Excessive tire pressure affects vehicle stability as well as the contact patch the tire is reduced. A value of tire contact patch with the contact surfaces is a major safety performance ligament car-wheel – the road. Furthermore, excessive pressure in the tires creates discomfort while driving and causes premature tire wear. On the wear rate of tires other than pressure affects the same pavement, the state of mechanical parts car, driving style. With regards to take action to control the air pressure in the bus: this procedure should be carried out at least once in month and before long trips.

Russian Market

Friday, April 28th, 2017

Posted in General | Comments Off on Russian Market

Bus Market, part of the automotive market in Russia is quite independent and has its own characteristics compared with the market passenger cars or trucks. Firstly, it is because consumers buses Russia – is mostly municipal companies. The need for passenger traffic increases, but despite this, the bus market is developing fast enough, because effective demand is very low, because municipal fleets are not funded. Click Pinterest to learn more. The bus market in Russia – a closed market, even compared to the truck market. Therefore, the development of the domestic bus market depends basically only on the production of Russian enterprises. Over the past few years, bus services in Russia carried out fairly rapidly. Release of buses is increasing every year. Increases the production of gazelles, sables. In general, buses serve about 1200 Russian cities and towns. Bus park regular routes in the country has 123,000 buses. Despite the increased production of buses and replace all obsolete Russian coaches is not yet possible.

Market Or Auction? What Better ?

Thursday, August 13th, 2015

Posted in General | Comments Off on Market Or Auction? What Better ?

Market or auction? Which is better? 1. Assessment of the vehicle main difference between the auction and the market is that with the auction, you buy a car in this condition, which you .Preimuschestvo auction of the car market – it Auction estimate). The car is estimated by experts, dosoverno describing in detail its technical condition. 2. Huge choice of cars is also among the pros – a huge selection of cars. Perhaps no car market in the world compared with the number of cars offered for sale at auctions in Japan. Thousands of machines sold by means of Japanese auctions every day.

Is it profitable to buy a Japanese car auctions are a European car? Very often found levorulny (European or American) car at the Japanese auctions. Moreover, there is a "left-handed" versions of which have been imported into Japan from Europe and America, and the right-hand drive, made by manufacturers specifically for the Japanese market. Differences, however, it is worth considering the fact that European and American cars bought in Japan, have the technical condition better than their counterparts in service at home. Japanese car owners tend to be found in perfect condition, and Japanese law does not allow to operate the vehicle in poor condition. Therefore, if you do not save on the purchase of a European or American cars in Japan, it almost certainly can get the same money car in the best condition, than if bought in Europe or the usa. This information is not confirmed what any statistics, and is, Rather, our long-term observation. Transfer steering on the left side is quite another thing if you want to get "blooded" Japanese cars with left-hand arrangement of a rudder.

At present, our company organized a service for transferring steering from right to left. All work on the transfer of power steering are performed by qualified personnel. After conversion, the car is absolutely no different from its levorulnogo analog. In the case of absence levorulnogo counterpart, also provides the highest quality conversion, which converted the car without any problems perceived by consumers as originally equipped with a left-hand steering. In this case, the converted machine will cost much cheaper than a car with a left handed drive, but imported from Europe or the usa.

Hydrolic Excavator Market

Monday, August 10th, 2015

Posted in General | Comments Off on Hydrolic Excavator Market

Annual market growth of hydraulic excavators in Russia is 4 5%. Against this background, the import machinery show rapid growth – 50 60%. It is obvious that growth occurs by reducing purchases of Russian technology production. This clearly shows the analysis of sales of new Russian and imported hydraulic excavators in Russia. Sales of Russian and imported hydraulic excavators in Russia.

However, Russian excavator market, especially the construction sector is not yet fully formed. According to the testimony of dealers who sell imported equipment, the demand in this sector is very chaotic. Due to rapid growth in construction companies typically receive in a row, and then urgently looking for a technique for its implementation. Visit Robert Kiyosaki for more clarity on the issue. Technology, available in stock for sale right now very quickly, while at work under the order delivery time has increased dramatically – the demand for excavators is growing not only in Russia. As a result, now the delivery time to customers is about 10 weeks or more. Dealers are forced to work in more difficult conditions – for them, according to some sources, delivery time reach 20 weeks. There is another aspect. Read more here: Bill Phelan. According to dealers, customers, working in the mining industry is already well learned how to take your money.

They pay attention not only on the price of the excavator, but also on its performance, watch the cost of standard hour maintenance, calculate fuel consumption for the production of cubic meters of rock. And, most importantly, they clearly understand that a machine that is idle, not only profitable – it causes damage, because the money spent on it could work the other way. And in the construction industry has found a company that found a job by accident and not fully aware of their costs. Obviously, as the market develops, this situation will change, and contractors on their own or others' mistakes will learn to develop more rational ways to use their equipment and their capitals.

LGP Scrapers

Thursday, February 2nd, 2012

Posted in General | Comments Off on LGP Scrapers

Under license from Liebherr dozers release of Bell and John Deere. It is noteworthy that the technique of all these producers meant practically for all occasions: for work on the moor (type LGP or PX) and coal depots, for road construction, dumping industrial waste and municipal solid waste (WHA). Most manufacturers produce machines with increased track width, or enlarged base. Among the characteristic features of some models of Caterpillar and Hindustan should include the use of triangular tracked contours with highly elevated driving wheel located between the front and rear idlers. This design prevents the increased wear crowns of driving wheels and avoids direct contact with the abrasive and wet environments. Until recently, the bulldozer-loosening assembly T-330 rear-engined in 1975 produced a plant CHZPT. Now the machine produces a layout of Kharkov Plant. VA Malyshev (engineering machine BG-1). Legend dumps in the table: S – direct (hard materials); U – universal extension boxes with large kerchiefs (skewed, which improves the ability to dig trenches and stripping works can also be used for land reclamation); SU – semiuniversal with short side scarves (with a buffer plate is effective for pushing scrapers to loading); A – Rotary, identical in form S-blade (for rock and heavy work); P – Variable load angle of tilt, VP (VPAT-Blade) – with adjustable height of lifting, lowering, rotation angle and tilt; RC – remediation universal; WC – for coal chips; CL – coal; HU – a powerful universal; LF – trash to landfills, with increased volume "bowl; TW – blade to work in two directions – pushing / drawing (cleaning the holds of ships); CU – the buffer to the amortization for the pushing scrapers (scrapers push for profiling on loading); CPB – push block to the amortization for pushing scrapers (for profiling pushing scrapers to loading); CB – Carbon bulldozer; VR – with variable radius.

Tire Equipment

Tuesday, July 26th, 2011

Posted in General | Comments Off on Tire Equipment

The need for more or less often or not often visit the tire, due to different reasons. Massive tire wheels spring and autumn, the usual seasonal business. However, not only in the off-season work tire. Throughout the year the tire 24 hours in Moscow during the day and at night may need to motorists. Depending on the ability to ride on the ability or right to park on the technical state visit to tire changing machine necessary not only in the season replacement wheels.

Edit cast wheels in contact with the machine in a pit – a common thing for mounting. Also, when cleaved from the disk or detecting cracks of cast disc motorist in a hurry in the tire. Here tire 24 hours in Moscow will provide services with argon welding and surfacing of the disc. Of course, such work is justified in the case of small chips and small cracks up to 80mm in length and depending on the size of the disk. Expensive alloy wheels with minor injuries, it makes sense to repair, however, with serious injuries is better not to risk it and replace these drives with new ones. Over the past few years a new generation of tires has the property RunFlat. This technology modern tires will allow any vehicle to pass on a completely run-flat tires, of course, at not very high (up to 80km per hour) speeds of up to 80km on the highway.

This technology has advanced tire manufacturers do not give buses crush and bend even at zero pressure. Heat-resistant cord and multi-layered rubber reinforce the sides of the tire. Without modern tire changer equipment such tires removed from die-cast disc manually is impossible. Our Tire Equipment designed to work with technology RunFlat. Tire 24 hours in Moscow eliminates axial runout wheels share the load balancing weights behind the spokes or cast iron disc. Novelty of last season was pumping wheels nitrogen. A similar service is inexpensive, but it offers some advantages when driving – mitigation of impact and the absence of pressure drops when changing temperature. Tyre changers work in the service operates qualified, the last technical training.